-
Telephone：+86-13222111178
-
Wechat：gary327252
-
-
Mailbox：postmaster@ermak.cn
Contact Information
周一至周五 8:00 - 20:00
WeChat
Product details
Performance characteristics
1, With advanced integrated hydraulic system, reliability is good.
2. The three-point support rolling guide eliminates the support gap and improves the cutting quality.
3, Motorized back gauge, manual fine-tuning, digital display; blade gap is adjusted by manual wheel, fast, accurate and convenient.
4, Rectangular blade, four cutting edges can be used, long service life; adjustable shear angle, reducing sheet distortion.
5. The upper tool holder adopts an inwardly inclined structure, which is convenient for blanking and can improve the precision of work.
6, It has the function of segmentation cutting; it has the function of light-to-line; the rear loading device (optional configuration).
▇ STANDARD EQUIPMENTS √ Hardened blades. - Top blades : 4 sides - Bottom blades : 4 sides √ E21S controller. √ 150mm throat depth. √ 600mm motorized backgauge system with 0,1 mm accuracy. √ 800mm side gauge and front support arms. √ Metric and inch rulers. √ Front, side and back safety panels which are suitable for CE norms. √ Sheet sliding system. √ Schneider Electric System. √ Rexroth hydraulic system. √ Hold down cylinders. √ Moveable foot pedal. √ Electric blade gap adjustment. √ Emergency stop button. √ Collapsible finger protection. | ▇ OPTIONAL EQUIPMENTS √ Optional throat depth. √ Front angle gauge. √ Side gauge and front support arms in optional lengths. √ Sheet conveyor and stacking system. √ Front Gauge X1, X2 axis and backgauge X3, X4 axis. √ Optional backgauge stroke. √ Sheet support system for thin sheets. 1- Pneumatic support system. (Lever type) 2- Pneumatic support system. (Monobloc panel type) √ Hydraulic oil cooling and heating system. √ Optional solid table. √ Stainless steel blades. √ Ability to increase stroke amount per minute. √ Light safety system for finger protection. √ Optional alternative colors. √ Coolant system or heater can be placed in electric panel during ambient conditions. √ Double foot pedal. √ Electrical panel or controller can be placed on right side of the machine. √ Laser cutting line. √ Central lubrication system. |
Product parameters
model | Shear plate thickness | Shearable plate width | Number of trips | Back gauge range | Shear angle | main motor power |
mm | mm | min -1 | mm | ° | kw | |
6×2500 | 6 | 2500 | 20-25 | 600 | 0.5-1.5 | 7.5 |
6×3200 | 6 | 3200 | 16-25 | 600 | 0.5-1.5 | 7.5 |
6×4000 | 6 | 4000 | 14-25 | 600 | 0.5-1.5 | 7.5 |
6×5000 | 6 | 5000 | 10-15 | 800 | 0.5-1.5 | 7.5 |
6×6000 | 6 | 6000 | 10-15 | 800 | 0.5-1.5 | 11 |
8×2500 | 8 | 2500 | 18-25 | 600 | 0.5-1.5 | 11 |
8×3200 | 8 | 3200 | 16-25 | 600 | 0.5-1.5 | 11 |
8×4000 | 8 | 4000 | 12-25 | 600 | 0.5-1.5 | 11 |
12×2500 | 12 | 2500 | 12-20 | 600 | 0.5-2 | 15 |
12×3200 | 12 | 3200 | 12-20 | 600 | 0.5-2 | 15 |
12×4000 | 12 | 4000 | 12-20 | 600 | 0.5-2 | 15 |
16×2500 | 16 | 2500 | 10-15 | 800 | 0.5-2.5 | 18.5 |
16×3200 | 16 | 3200 | 10-15 | 800 | 0.5-2.5 | 18.5 |
16×4000 | 16 | 4000 | 8-15 | 800 | 0.5-2.5 | 18.5 |
20×2500 | 20 | 2500 | 8-12 | 800 | 0.5-2.5 | 30 |
20×4000 | 20 | 4000 | 8-12 | 800 | 0.5-2.5 | 30 |
25×2500 | 25 | 2500 | 6-10 | 800 | 0.5-3.5 | 37 |
25×3200 | 25 | 3200 | 6-10 | 800 | 0.5-3.5 | 37 |
25×4000 | 25 | 4000 | 6-10 | 1000 | 0.5-3.5 | 37 |
32×2500 | 32 | 2500 | 6-8 | 1000 | 0.5-3.5 | 45 |
32×3200 | 32 | 3200 | 6-8 | 1000 | 0.5-3.5 | 45 |
40×2500 | 40 | 2500 | 4-8 | 1000 | 0.5-3.5 | 75 |
40×3200 | 40 | 3200 | 4-8 | 1000 | 0.5-3.5 | 75 |
Product details
Performance characteristics
1, With advanced integrated hydraulic system, reliability is good.
2. The three-point support rolling guide eliminates the support gap and improves the cutting quality.
3, Motorized back gauge, manual fine-tuning, digital display; blade gap is adjusted by manual wheel, fast, accurate and convenient.
4, Rectangular blade, four cutting edges can be used, long service life; adjustable shear angle, reducing sheet distortion.
5. The upper tool holder adopts an inwardly inclined structure, which is convenient for blanking and can improve the precision of work.
6, It has the function of segmentation cutting; it has the function of light-to-line; the rear loading device (optional configuration).
▇ STANDARD EQUIPMENTS √ Hardened blades. - Top blades : 4 sides - Bottom blades : 4 sides √ E21S controller. √ 150mm throat depth. √ 600mm motorized backgauge system with 0,1 mm accuracy. √ 800mm side gauge and front support arms. √ Metric and inch rulers. √ Front, side and back safety panels which are suitable for CE norms. √ Sheet sliding system. √ Schneider Electric System. √ Rexroth hydraulic system. √ Hold down cylinders. √ Moveable foot pedal. √ Electric blade gap adjustment. √ Emergency stop button. √ Collapsible finger protection. | ▇ OPTIONAL EQUIPMENTS √ Optional throat depth. √ Front angle gauge. √ Side gauge and front support arms in optional lengths. √ Sheet conveyor and stacking system. √ Front Gauge X1, X2 axis and backgauge X3, X4 axis. √ Optional backgauge stroke. √ Sheet support system for thin sheets. 1- Pneumatic support system. (Lever type) 2- Pneumatic support system. (Monobloc panel type) √ Hydraulic oil cooling and heating system. √ Optional solid table. √ Stainless steel blades. √ Ability to increase stroke amount per minute. √ Light safety system for finger protection. √ Optional alternative colors. √ Coolant system or heater can be placed in electric panel during ambient conditions. √ Double foot pedal. √ Electrical panel or controller can be placed on right side of the machine. √ Laser cutting line. √ Central lubrication system. |
Product parameters
model | Shear plate thickness | Shearable plate width | Number of trips | Back gauge range | Shear angle | main motor power |
mm | mm | min -1 | mm | ° | kw | |
6×2500 | 6 | 2500 | 20-25 | 600 | 0.5-1.5 | 7.5 |
6×3200 | 6 | 3200 | 16-25 | 600 | 0.5-1.5 | 7.5 |
6×4000 | 6 | 4000 | 14-25 | 600 | 0.5-1.5 | 7.5 |
6×5000 | 6 | 5000 | 10-15 | 800 | 0.5-1.5 | 7.5 |
6×6000 | 6 | 6000 | 10-15 | 800 | 0.5-1.5 | 11 |
8×2500 | 8 | 2500 | 18-25 | 600 | 0.5-1.5 | 11 |
8×3200 | 8 | 3200 | 16-25 | 600 | 0.5-1.5 | 11 |
8×4000 | 8 | 4000 | 12-25 | 600 | 0.5-1.5 | 11 |
12×2500 | 12 | 2500 | 12-20 | 600 | 0.5-2 | 15 |
12×3200 | 12 | 3200 | 12-20 | 600 | 0.5-2 | 15 |
12×4000 | 12 | 4000 | 12-20 | 600 | 0.5-2 | 15 |
16×2500 | 16 | 2500 | 10-15 | 800 | 0.5-2.5 | 18.5 |
16×3200 | 16 | 3200 | 10-15 | 800 | 0.5-2.5 | 18.5 |
16×4000 | 16 | 4000 | 8-15 | 800 | 0.5-2.5 | 18.5 |
20×2500 | 20 | 2500 | 8-12 | 800 | 0.5-2.5 | 30 |
20×4000 | 20 | 4000 | 8-12 | 800 | 0.5-2.5 | 30 |
25×2500 | 25 | 2500 | 6-10 | 800 | 0.5-3.5 | 37 |
25×3200 | 25 | 3200 | 6-10 | 800 | 0.5-3.5 | 37 |
25×4000 | 25 | 4000 | 6-10 | 1000 | 0.5-3.5 | 37 |
32×2500 | 32 | 2500 | 6-8 | 1000 | 0.5-3.5 | 45 |
32×3200 | 32 | 3200 | 6-8 | 1000 | 0.5-3.5 | 45 |
40×2500 | 40 | 2500 | 4-8 | 1000 | 0.5-3.5 | 75 |
40×3200 | 40 | 3200 | 4-8 | 1000 | 0.5-3.5 | 75 |
